How do you inspect a fire door?

A fire door inspection includes checking the certification label, ensuring gaps are 3-4mm, and verifying intumescent seals are intact. Hinges, closers, and latches must be fire-rated and functional. The door should close fully and latch automatically without obstruction. Any damage, warping, or missing seals can compromise safety and require immediate attention.

How often does a fire door need to be checked?

Fire doors should be inspected every 6 months, but high-traffic areas like hospitals and schools may require checks every 3 months. Residential buildings and workplaces should have annual inspections to ensure compliance.

How to check if a door is fire-rated?

Look for a certification label on the door’s top or side. Fire doors are typically 44mm (FD30) or 54mm (FD60) thick. Intumescent seals should be intact, and hinges must be fire-rated. The door should close fully and latch automatically.

What is involved in the fire door test procedure?

Fire doors are tested under BS 476-22 or EN 1634-1 standards. The test includes exposure to fire, checking integrity (flame resistance), insulation (heat control), and self-closing function. This ensures the door blocks fire and smoke for the certified duration (e.g., FD30 = 30 minutes).

Fire Door Expert ensuring Fire Door Maintenance

Commercial & Domestic Fire Door Maintenance

Our fire door maintenance service is all about solving your pain points—no more stressing over compliance issues or safety hazards. We handle everything from thorough inspections to precise repairs so you can focus on what matters most. With us on your side, you'll get:

Ultimate Peace of Mind: We ensure every fire door is up to code and performing flawlessly.
Cost-Saving Efficiency: By preventing potential risks, you avoid costly damage and downtime.
Hassle-Free Protection: Our expert team takes care of the details, so you can say goodbye to fire safety headaches.

Simply put, our service takes the worry out of fire door maintenance, letting you enjoy a safer, more secure space.

Get Free Expert Advice

Here are some of the common maintenance tasks we carry out to operating fire doors

Replace leaking hinges.
Adjust and realign doors that have come out of alignment with the frame.
Gap adjustment around the door edges to restore correct tolerances.

Tighten or replace loose locks and ironmongery.
Install missing signage to ensure compliance.
Replace missing screws for reinforced stability.

Repair or replace broken door stops.
Repair or install new door closers.
Replace worn or damaged fire door seals for improved fire resistance.

FIRE DOOR Maintenance FACT

Did you know that a staggering 75% of 100,000 fire doors inspected in 2021 by FDIS, failed to meet required standards, putting hundreds of lives at risk. This alarming figure from the Fire Protection Association underscores

the life-saving importance of proactive fire door maintenance.

Benefits of Professional Fire doors maintenance

Compliance with Regulations

Proper Fire Door Maintenance ensures that fire doors meet all local and national building & fire safety regulations.

Guarantees Durability

Quality maintenance service guarantees long-lasting performance, reducing the risk of premature wear & tear.

No Room for Error

Avoid costly mistakes & ensure correct performance with professional fire door maintenance services.

Clients Who Trust Us With Their Fire Safety

Smart Fire Door Compliance at Your Fingertips

We offer Client Digital Portal for Fire Doors

01

Comprehensive Asset Tracking

Assign unique QR codes to every fire door, allowing you to track location, maintenance history, and compliance status instantly.

03

Real-Time Compliance Dashboards

Gain instant access to a dashboard with clear insights into the status of your fire doors, helping you monitor compliance and safety metrics at a glance.

02

Custom Inspection Scheduling

Set automated reminders for inspections and maintenance based on your preferred intervals (e.g., 3, 6, or 12 months), ensuring no deadline is missed.

04

Photo and Report Storage

Securely store all inspection reports and photographic evidence for easy reference and seamless auditing.

Fire Door Maintenance Subscription – Planned Preventative Maintenance (PPM) for Fire Doors

Our Planned Preventative Maintenance (PPM) contract combines all essential fire door services, including inspection, maintenance, remedial work, and installation, into one seamless package.
With regular fire door inspections, we identify potential issues like faulty hinges, gaps, or damaged seals to ensure compliance. Our maintenance services keep all components functioning optimally, while our remedial work quickly addresses defects to restore fire door performance. Additionally, we offer expert fire door installation to upgrade your building’s safety infrastructure when needed, ensuring it meets all legal standards.
By signing up for a PPM contract (1, 3, or 5 years), you’ll enjoy discounted rates and consistent fire safety support, eliminating the stress of managing compliance. Our proactive approach ensures your fire doors remain fully functional, protecting lives and property while keeping your business aligned with regulatory requirements. Ready to secure your safety? Explore our services or Request a quote today.